Product and options
The Basic delivery of the DistriCool kit consists of following elements : (click on the element for a detailed description):
1 for side door and 2 for rear doors
Provided with a cut-out for door handle mechanisme.
Districool Basic |
FNA |
FRC |
ECO |
|
Insulation foam |
60mm PU |
60mm PU |
60mm PU |
No door shell |
Extra door rubber |
– |
Extra door rubber for enhanced insulation |
Extra door rubber for enhance insulation |
– |
Shell composition:
- 2 mm polyester + gelcoat
- DCECO version has no door shells; instead a fitting 2mm polyester cover plate is provided
- The thickness of the insulation for the rear doors is 60mm; for the side doors it varies between 6 to 50mm, in function of the vehicle model
- The side and rear doors of DCFNA & DCFRC are provided with door rubbers for an even better insulation
Districool Basic |
FNA |
FRC |
ECO |
|
Insulation foam |
66mm PU |
66mm PU |
66mm PU |
66mm EPS |
Panel composition :
- 2 mm polyester + gelcoat
- 5 mm plywood
On 3 sides the insulation is 60mm thick. One side is 20mm thick.
They are designed to perfectly cover the wheel arches of the panel van.
Districool Basic |
FNA |
FRC |
ECO |
|
Multiplex |
10mm WBP |
10mm WBP |
10mm WBP |
10mm WBP |
Insulation foam |
78mm PU |
78mm PU |
93mm PU |
78mm EPS |
Multiplex |
3,6mm WBP |
3,6mm WBP |
3,6mm WBP |
3,6mm WBP |
Reinforcements |
Reinforced with hardwooden beams at side and rear door step positions |
|||
Polyester skin |
1,5mm |
1,5mm |
1,5mm |
1,5mm |
Composition:
- 10 mm WBP multiplex
- 2 mm polyester skin
- Optional : number of floor finishes
Header and two pillars left and right
Districool Basic |
FNA |
FRC |
ECO |
|
Laminate |
2mm laminate (gelcoat, resin + 750gr glass mat) |
|||
Insulation foam |
60mm PU |
60mm PU |
60mm PU |
60mm EPS |
Composition:
- 2mm laminate (gelcoat, resin + 750gr/m² glassmat)
The insulation of the rear frame has a thickness of 30 to 67 mm, in function of the models.
Provided with small lips for perfect fitting.